Cryogenic offers Additive injection panel is widely used for injecting additives into main product line (HSD, MS, SKO). This additive injection panel is installed mainly at distribution facilities.
It is very accurate in nature with low pressure drop.
It mainly consists of additive oval gear meter, solenoid valve, strainer, check valves, needle valves and completely mounted on stainless steel / Aluminum panel
Areas of application.
Proof of our quality and excellent price is the fact that over 250 panels were delivered to our customers by 2018.
The most important users of our additives injection panels are the corporates like Indian Oil Corporation Limited, Bharat Petroleum Corporation Limited, Hindustan Petroleum Corporation Limited.
F1 - Flow rate Litre per Hour |
---|
F1 - 0.5 TO 36 LPH |
F2 - 2 TO 100 LPH |
F3 - 15 TO 550 LPH |
E1 - Electronics |
---|
E1 - loop powered 4 -20 Ma (Analogue output +ATEX) |
E2 - Hall sensor / Pulse output (ATEX) |
S1 - Size OF inlet/outlet of Panel |
---|
S1 - ¼” OD |
S2 - ¼” NPT(F) |
S3 - 1/2” NPT(F) |
J - Junction Box |
---|
J1 – with junction box. |
J2 – without junction box. |
Additive panel mainly consists of Oval gear flowmeter, positive displacement flow meter, SOV ,NRV ,Strainer, Needle valve , Ball valve When liquid flows from additive dosing skid signal/command by PLC/Batch controller unit through this positive displacement flowmeter, two oval geared rotors measure a constant volume per rotation within a precisely machined measuring chamber. With each rotation, a constant volume of liquid is measured. The rotation of the oval gears is sensed via magnets embedded within the rotors. These magnets transmit a high resolution pulse output. The output signal can be process externally via a remote display controller or PLC or via a variety of output/display options available as accessories attached to the flow meters with this Solenoid valve is used for controlling the dosing rate by PLC or batch controller. once required additive is measured and dose into main line PLC or Batch controller unit close SOV and command to dosing skid to Stop dosing pump.
Stainless Steel S316, 1/4"O.D.x 1/4" O.D. (consult For 3/8" Or 1/2")
SS 316 1/4" O.D. X 1/4" O.D. (consult For 3/8" Or 1/2")
SS 316 Y Type 100 Mesh 1/4" O.D. X 1/4" O.D. (consult For 3/8" Or 1/2" Or For Any Mesh Other Than 100)
1/4" O.D. SS 316 (consult For 3/8" Or 1/2")
600 mm L X 400 mm W X 3 mm Thk. SS 316 / Aluminium
12 Kgs.
1/4" O.D X 1/4" O.D. (consult For 3/8" Or 1/2")
Suitable For P.D. Meter, Atex, CE Approved.
FLP Available On Request.