Cryogenic offers Optical Air Eliminators for mainly loading and unloading application . This optical air eliminator is mainly used where during low flow or flow with high air is present in flow condition.and when immediate flow needs to stop.
Optical air eliminator works on principal of liquid level sense. This air eliminator is installed with optical sensor at different elevation in the air eliminator to sense the liquid level. When liquid level rises upto optical sensor level it instantly signal to the batch controller unit to start loading or unloading application. When loading/unloading application is about to complete there is chances on air with low flow with liquid which enters into the air eliminator and when liquid level go below optical sensor it signals batch controller unit to close the loading and unloading application.
| S0 - Nominal Size mm | |
|---|---|
| S0 - 1.5”( 40 mm) | S8 – 14” (350 mm) |
| S1 – 2” (50 mm) | S9 - 16” (400 mm) |
| S2 – 3” (80 mm) | S10 – 18” (450 mm) |
| S3 – 4” (100 mm) | S11- 20”(500 mm) |
| S4 – 6” (150 mm) | S12 – 24”(600 mm) |
| S5 – 8” (200 mm) | S13- AS PER CUSTOMER’S REQUIRMENT |
| S6 – 10” (250 mm) | |
| S7 – 12” (300 mm) | |
| R - Rating (Standard flange are Slip on Race face type if Weld Neck type is required please specify) |
|---|
| R1 – ANSI B 16.5 150# |
| R2 – ANSI B 16.5 300# |
| R3 - ANSI B 16.5 600# |
| M - Material of construction |
|---|
| M1 SA 516 GR.70 (BODY) & ASTM A 105 (FLANGES) |
| M2 SA 516 GR.70 (BODY) & SA 352 LF2 (FLANGES) |
| M3 IS 2062 GR.B ( BODY) & ASTM A 105 (FLANGES) |
| M4 SS 304 (BODY) & ASTM A 182 F 304 (FLANGES) |
| M5 SS 316 (BODY) & ASTM A 182 F 316 ( FLANGES) |
| M6 SA 106 GR B ( BODY) & ASTM A 105 ( FLANGES) |
| M7 SA 333 GR 6 ( BODY ) & SA 350 LF2 ( FLANGES) |
| * NOTE : All gaskets/Seals will be SS 304 inner /outer with PTFE/Graphite filler and stud /nuts will be ASTM A 193 Gr.B7 / A 194 Gr.2H |
| F - Flow range (It Can be any between Specified Value) |
|---|
| F0 0- 1000 LPM |
| F1 0 – 1500 LPM |
| F2 0 - 2500 LPM |
| F3 0 - 4000 LPM |
| F4 0 - 5000 LPM |
| F5 0 - 7500 LPM |
| F6 0 – 10000 LPM |
| F7 0 – 15000 LPM |
| F8 0 – 20000 LPM |
| F9 0 to Customer Specific Flow rate. |
| P - Operating pressure (Normal) |
|---|
| P1 0 – 6 KG/CM2 |
| P2 0 – 10 KG/CM2 |
| P3 0 - 15 KG/CM2 |
| P4 0 – 25 KG/CM2 |
| P5 0 - 35 KG/CM2 |
| P6 0 – 60 KG/CM2 |
| A - Accessories |
|---|
| A1 Ball valve for drain and vent. |
| A2 Thermal safety valve / Pressure Relief Valve. |
| A3 pressure gauge. |
| A4 companion flange with studs and gasket. |
| A5 Flame Arrestor. |
| If you want to order all above items kindly insert as A12345. |
