Products

Air Receiver

(Air Receiver / Volume Bottle / Pressure Vessel)

Air Receiver are tanks used for the compressed air storage and recommended to be in all compressed air system. Using air receiver of unsound or questionable construction can be very dangerous. Therefore, the American Society of Mechanical Engineers (ASME) has developed a code regarding the construction of unfired pressure vessels, which has been incorporated into many federal, state and local laws. This particular code is ASME Code Section VIII Division 1.

AWe have manufactured more than 40 Nos. till 2014.

We have manufactured Air receiver of capacity 0.1 M3 to 5M3 as per ASME Code Section VIII Division 1.

Air Receivers are equipped with Safety valve, Pressure Gauge, Pressure switch, Hand holes or Manholes and a base for vertical air receiver.

Air Receiver serves Several Important Purpose

  • Decrease wear and tear on the compression module, capacity system and motor by reducing excessive compressor cycling.
  • Eliminate pulsation from the discharge line.
  • Separate some of the moisture, oil and solid particles that might be present from the air as it comes from the compressor.
  • Contribute to reduced energy costs by minimizing electrical demand charges associated with excessive starting of the compressor motor.
AIR RECEIVER STANDARD DIMENSION TABLE
VOLUME CAPACITY TOTAL HEIGHT
A
OUT SIDE DIAMETER
B
INLET NOZZLE ELEVATION FROM SHELL
C
INLET NOZZLE ELEVATION FROM GROUND
D
END TO END
E
HAND HOLE OR MANHOLE ELEVATION FROM SHELL
F
0.5 M3 2330 610 200 700 1110 500
1.0 M3 2833 766 300 852 1166 700
3.0 M3 3190 1284 400 1121 1684 800
5.0 M3 3418 1632 400 1234 2032 900